How To Install an Oil Separator Catch Can

Oil separator catch cans are not required by law, but they are highly recommended for anyone who wants to keep their car in top condition. An oil separator catch can is a device installed between the air intake system and the engine. It collects the oil and other contaminants drawn into the engine with the air. This prevents the oil from entering the engine and causing damage.

You’ll need to know a few things before installing your new oil separator can. The ideal place to install your catch can is as close to the engine as possible. This will help to reduce the amount of oil vapor that escapes and is caught by the can. Furthermore, not all engines are created equal, so you’ll need to ensure you have the right catch can for your engine type. Consult with the manufacturer or an automotive specialist if you’re not sure. You’ll also need to get the right size catch can. It should be large enough to accommodate the amount of oil vapor your engine produces.

You’re ready to start installing your oil separator with these factors in mind. Today, we’ll cover the steps involved with installing an oil separator can so you can drive safely with increased vehicle performance.

Clean the installation area.

Installing an oil catch can is a relatively easy process. The first step is to clean the area. Make sure that there is no debris or oil on the surface. If you don’t clean the area first, the can may not work as effectively. Debris and oil could get caught in the can and cause it to not function properly.

Remove the air intake system.

Removing the air intake system is the next step in installing your oil catch can. This can be done by removing the air filter and the housing surrounding it. The air filter is typically held in place by two or three screws, which can be removed with a screwdriver. The housing is held in place by several clips. The oil catch can be installed in its place.

Install the oil separator can.

Once the air intake is removed, the next step is to install the oil separator. This is done by placing the can in the desired location and using the mounting hardware included in the kit. Most oil separator cans come with a mounting bracket, screws, and washers. This step typically involves drilling a hole in the wall and then mounting the bracket with the screws. Once the bracket is in place, the oil separator can be attached to it, and then the washers can be placed over the screws to keep them in place. Ensure the can is securely mounted before moving on to the next step.

Connect the hoses and reassemble the air intake system.

The next step is to connect the inlet and outlet hoses to the oil separator can. The inlet hose should be connected to the engine’s intake manifold, and the outlet hose should be connected to the engine’s oil drain. The hoses can be connected using hose clamps or zip ties. Most oil separator catch cans come with hose clamps.

Now you can reassemble the air intake. This involves putting the air filter box back in place, reconnecting the hoses and cables, and reattaching the clamps and screws. Ensure the air filter is clean and free of debris before reassembling the air intake.

Connect your oil catch can to the power supply.

The next step is to connect the power supply. The oil catch can power supply can be a 12-volt power supply or by the vehicle’s battery. The power supply should be connected to the can using the supplied wiring harness. Once the wiring is connected, the power supply can be turned on.

When the power supply is turned on, the oil catch can start to work. The can will suck in air and oil from the engine. The oil will be collected in the can, and the clean air will be released back into the engine.

Once the oil separator is installed, it should be checked regularly to ensure that it is functioning properly. The oil catch can be emptied regularly so that the oil and contaminants do not build up.

Enjoy your increased vehicle performance.

Now that you know how to install an oil separator can, you can start enjoying its benefits, including increased fuel economy and engine performance. The oil catch can help to keep the engine clean and running smoothly.